|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
70.10.112.3
nt
Follow Ups:
it's pretty simple as i remember...first turn the knob on the left to the first position, with a little screwdriver turn the bias pot at the appropriate tube until the meter reaches the spot between the red and green, repeat for the other tube, then set the bias knob back to the off position, then you're set.
am i missing something?
With my HH Scott amp I have to pull the phase-splitter tubes out. Do I have to pull the driver tubes? If it's as simple as you say then cool! Thanks for the reply!!!
No need to pull the driver tubes. No need for resistors either. You should have speakers connected when you turn the amp on, and you bias the tubes with the amp on.
If you don't have the manual I would call Divertech to be absolutely sure...they're the dist. for US and Canada. 519 749 1565. They answer the phone and are helpful.
nt
This post is made possible by the generous support of people like you and our sponsors: