|
Planar Speaker Asylum Welcome! Need support, you got it. Or share your ideas and experiences. |
For Sale Ads |
Use this form to submit comments directly to the Asylum moderators for this forum. We're particularly interested in truly outstanding posts that might be added to our FAQs.You may also use this form to provide feedback or to call attention to messages that may be in violation of our content rules.
Original Message
RE: Another First Reflection Trap (FRT) Adventure : Quasi-Ambiophonics
Posted by MG-bert on March 4, 2017 at 09:54:10:
Josh358: "I take it you're still using your original setup at home?"
Short answer is yes, unfortunately I don't get to listen to it as often as I'd like.
Longer answer: I have tried to do the setup shown by st.chelvam, and got pretty good results. I used my 2 FRT panels as the barrier, stiffeners touching so the total barrier was about 4" wide, and using those foam pipe insulators on the forward edge as a headrest. I had my Gunned MMGs touching the FRT panels, about 4 feet away from my ears. So the angle between the tweeters was between 10-20 degrees, which should be ideal. I was thinking, though, that the fact that the FRTs are wooden panels did the configuration a disservice, since the high frequencies bouncing off the hard surface might have had a smearing effect. So I have a plan to glue some insulation to that reflective surface (thinking the textured foam used as mattress cushions) to reduce those reflections. These reflections don't seem to be a problem with the separated configuration I wrote about initially, btw. Haven't had the opportunity to do that yet.
And besides, the separated configuration allows for a TV screen so I can control the music selection or watch a concert video. Can't do that with the barrier dead center. Although a VR reality set of goggles would make that possible... ;-)