Home Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ Tube DIY Asylum ]
[ Alert Moderator ]

RE: Spectacular ! ...............

Thanks. The chassis was fabricated from a long 10" x 2" aluminum extrusion. It was cut to a length of 14" for this project. The material is 1/8" thick. The front panel is cut from 1/2" 6061 aluminum and is attached to the chassis with brackets bolted to the sides. The two internal sub-chassis are also bolted to the sides. The oak side panels have threaded brass inserts and are attached with screws from inside the chassis. The rear panel is 1/8" aluminum and is attached to brackets bolted to the sides and bottom of the chassis. That's the basics. :)



















This post is made possible by the generous support of people like you and our sponsors:
  Schiit Audio  

Follow Ups Full Thread
Follow Ups
FAQ

Post a Message!

 Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.

[ Top Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2024, Audio Asylum, all rights reserved ]
[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]