|
Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
|
|
Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
In Reply to: Dynaco PAS-4 preamp mods for North American electrical power posted by magiccarpetride on August 14, 2022 at 18:08:34:
Not sure what you mean by 'comes with a step-up transformer'. Is this separate from the unit itself? --- I have some Step-down transformers that I took to Australia to plug in my 110 Devices.So, yes, the unit could be modified to convert to 110 volts, and I have worked with Manufacturers to do this. Sometimes it involves just wiring the internal transformer differently, but in some cases it involves replacing the existing Transformer with another for 110 volts.
Some pictures of what you have would be helpful. Internal etc. - But, in the end since the unit is old, you'll probably need to find a tech to help you out on this one.
Edits: 08/15/22
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Dynaco PAS-4 preamp mods for North American electrical power - Cut-Throat 05:25:44 08/15/22 (6)
- RE: Dynaco PAS-4 preamp mods for North American electrical power - magiccarpetride 13:16:15 08/16/22 (5)
- RE: Dynaco PAS-4 preamp mods for North American electrical power - Cut-Throat 18:40:39 08/16/22 (3)
- RE: Dynaco PAS-4 preamp mods for North American electrical power - magiccarpetride 19:11:51 08/16/22 (2)
- RE: Dynaco PAS-4 preamp mods for North American electrical power - Cut-Throat 04:25:10 08/17/22 (1)
- "They are too small to see anything" - 1973shovel 07:40:25 08/17/22 (0)
- RE: Dynaco PAS-4 preamp mods for North American electrical power - Cut-Throat 13:27:29 08/16/22 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
