![]() |
Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
In Reply to: My first "zero gain preamp" posted by E-Stat on March 11, 2011 at 12:45:47:
The input and output impedance, and the resulting issues those impedances create, always kept me away from a passive volume controlHere's information I've lifted from the Horn Shoppe site:
"It has an input impedance too high to measure, output impedance is a couple ohms, bandwidth is to 60Mhz, slew rate is a couple hundred V/microsecond.
There are no capacitors or resistors in the signal path. There is no potentiometer in the signal path.
It uses photo cells to control the volume. It does not use optocouplers.
It is an "active" device and suffers none of the "problems" that "passive volume control/pre amps" have. It can drive long (30 feet) cables with ease."
Edits: 03/11/11
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- There are differences between The Truth and a passive attenuator based control - 1973shovel 13:47:45 03/11/11 (3)
- If you need to drive long cables - E-Stat 14:50:51 03/11/11 (2)
- I agree... - clio09 12:11:02 03/13/11 (1)
- It is all about - E-Stat 14:54:55 03/13/11 (0)