the trouble is that you can't ensure the liquds are not travelling up on the cantilever...

Posted by kuma (A) on March 7, 2010 at 13:31:44

In Reply to: Wow! posted by Muzikmike on March 7, 2010 at 10:39:19:

even with a x40 loupe, I can't see where exactly fluids are applied.

I think that the liquid stylus cleaner itself can be beneficial but the user errors are too high. This is probably why some cartridge manufacturers do not recommend it.

A friend told me the diamond inside his Dyna 17D fell off from overuse of stylus cleaner. Apparently, the stylus was unglued from applying it on a wrong spot.

A dry method ( either with the AT/Signet vibrating stylus cleaner without liquids ) or Linn's Green paper work just as fine )

This post is made possible by the generous support of people like you and our sponsors:

Follow Ups Full Thread

Topic - LP pressing fault or set up issue? - nevillekapadia 03:08:12 03/07/10 (16)

A far safer method of cleaning your stylus - Muzikmike 08:58:36 03/07/10 (6)

RE: A far safer method of cleaning your stylus - Biff 10:10:17 03/07/10 (5)

RE: A far safer method of cleaning your stylus - Fred J 11:27:04 03/07/10 (1)

I don't know, but I quit using the crap. /nt - Biff 12:08:34 03/07/10 (0)

Wow! - Muzikmike 10:39:19 03/07/10 (2)

the trouble is that you can't ensure the liquds are not travelling up on the cantilever... - kuma 13:31:44 03/07/10 (1)

RE: the trouble is that you can't ensure the liquds are not travelling up on the cantilever... - Fred J 13:45:28 03/07/10 (0)

My take... - JeffH 07:28:21 03/07/10 (0)

RE: LP pressing fault or set up issue? - astralnavigator 06:04:51 03/07/10 (0)

RE: LP pressing fault or set up issue? - Fred J 05:07:08 03/07/10 (6)

Dissagree - rocky raccoon 06:19:09 03/07/10 (5)

RE: Dissagree - Fred J 07:55:22 03/07/10 (4)

RE: Dissagree - astralnavigator 08:51:02 03/07/10 (3)

RE: Dissagree - kotms 10:59:38 03/07/10 (2)

RE: Dissagree - nevillekapadia 11:57:07 03/07/10 (1)

RE: Dissagree - John Elison 22:25:07 03/07/10 (0)

Follow Ups

the trouble is that you can't ensure the liquds are not travelling up on the cantilever... - kuma 13:31:44 03/07/10 (1)

RE: the trouble is that you can't ensure the liquds are not travelling up on the cantilever... - Fred J 13:45:28 03/07/10 (0)

the trouble is that you can't ensure the liquds are not travelling up on the cantilever...

Post a Message!