Home Tweakers' Asylum

Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ.

Help Reconfiguring a VansEvers Power Line Conditioner with Upgraded AC Receptacles

I'm considering pressing back into service a VansEvers Model 85 (four-duplex) power line conditioner. I first became aware of these following Mike VansEvers's DIY article in an issue of Sound Practices. And I remember his commercial units being highly regarded -- at least back in the '90s. I've been using a Furutech e-TP60 power distributor for the last decade. But, some initial experiments with this VansEvers unit, along with a Custom Power Cord Company Super Power Block, have been positive (if not determinative). Is it worth trying to upgrade the Model 85 in order to improve my power situation -- which includes three million neighbors (population of Brooklyn), a laundromat on the first floor of my apartment building, and a subway station in the basement? POWER HELL from an audio perspective (but pretty appealing from a social perspective considering my fiancee lives here and doesn't want to move). I do have a 20-amp dedicated line and recently-upgraded 70-amp (I think) breaker panel -- great landlord. Still, I'm hugely embarrassed to admit these dire circumstances to some of you guys with your backyard powerplants! :) Perhaps I need to take much more drastic measures and look into a power regenerator, battery options, etc.

Anyway! My Model 85 is completely stock, and I'm wondering about upgrade possibilities. I have some unused Oyaide SWO receptacles lying around, and I figure it would be an easy swap. That is, assuming the Oyaides would be an upgrade to whatever is currently there -- some sort of cryo-treated hospital-grade duplexes, I believe?

Specifically, I have one cryo-treated SWO-XXX Ultimo and two non-cryo-treated SWO-DX receptacles ... and would consider picking up a fourth (Oyaide or other?) to replace the four VansEvers duplexes. To further complicate things, those duplexes are configured for -- and labeled -- "Amplifiers" x 1; "Analog" x 1; and "Digital/Video" x 2. I guess my question boils down to: is it obvious which Oyaide SWO receptacle should be assigned to which PLC "function"? I'm also curious what should fill the fourth slot (whatever/wherever that happens to be) -- Oyaide SWO or something else?

All this said, I'm resigned to the fact that these receptacles may not be an ideal match with this PLC and/or the rest of my system. But, they're what I've got on-hand, and I'd like to put them to use.

If it's a good idea to go to this level of detail, components are in my profile, and power cords are as follows...

Amp and pre-amp: Flavor 2 with FI-25 (G) both ends
Turntable motor: Flavor 4 with FI-32 (R) IEC and FI-11 (Cu) male AC
Phono pre-amp: generic captive power cord with 2-prong male AC (which I'd like to improve upon)
DAC: Flavor 1 with C-046 and P-079 (coming soon)
Transport: captive power cord with 3-prong male AC (which I'd like to improve upon)
Subwoofer: FMS SineWave 62 (which I need for its low-profile Schurter IEC connector)

Ultimately, everything will plug into a Furutech GTX-D (G) AC wall receptacle via a Flavor 4 with FI-25 (G) both ends.

I'll also get around to replacing the IEC inlet on the VansEvers unit, I suppose. But, that's probably down the line. I'd like to replace these receptacles first.

THANKS for thoughts, suggestions, advice...


This post is made possible by the generous support of people like you and our sponsors:
  Kimber Kable  


Topic - Help Reconfiguring a VansEvers Power Line Conditioner with Upgraded AC Receptacles - Jim Hodgson 10:20:58 02/03/17 (9)

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.