In Reply to: RE: Black Gate N caps for tuner posted by sherod on June 18, 2016 at 16:18:27:
OK, but just a work of caution, while the boards are decent the circuit traces are really, really delicate. Watch the iron temp and get in and out fast.
Starting at the IF board and strictly looking at the signal path,
C15 add a 0.047 polyprolylene bypass cap WIMA MKP2 is nice.
MPX board
C4 add a 0.047 polyprolylene bypass cap WIMA MKP2
C17 & 19 The 10 would work there but I would go 22
C18 & 20 The 10s will be fine there
Audio board
C5 & 15 The schemo says 1, the factory installed 4.7, on at least the 2 I worked on
C10 & 20 10s are fine there.
That's everything in the signal path.
Have fun!
HA
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Black Gate N caps for tuner - HoosierAudio 18:09:36 06/18/16 (7)
- cap value at C17/19 on MPX board - sherod 11:12:05 06/26/16 (2)
- RE: cap value at C17/19 on MPX board - HoosierAudio 16:19:05 06/26/16 (1)
- RE: cap value at C17/19 on MPX board - sherod 16:37:56 06/26/16 (0)
- RE: Black Gate N caps for tuner - sherod 18:23:13 06/18/16 (2)
- RE: Black Gate N caps for tuner - HoosierAudio 18:33:15 06/18/16 (1)
- I didn't know that... - sherod 18:37:21 06/18/16 (0)
- Much appreciated, Hoosier... - sherod 18:11:57 06/18/16 (0)