Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: 5R4G and 5U4G condenser output value posted by DAK on January 21, 2017 at 11:55:04:
what comes after the first cap is important. If you go 10uf to a 10 ohm resistor to a 100uf cap it will blow up. You need to have an adequate choke or resistor after the cap. PSUII can give you some kind of indication of acceptable loading.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- I have used a 10uf first cap with 5R4 without any issues, but... - Chip647 16:31:45 01/21/17 (2)
- RE:I am using CLCLC - DAK 18:18:29 01/21/17 (1)
- RE:I am using CLCLC - Michael Samra 04:36:27 01/23/17 (0)