|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: RE: if 7B4 is the best driver tube for SE DC 2A3 ... posted by Tre' on March 1, 2017 at 20:50:20:
The 12BZ7 isn't really any less "linear" than a 12AX7. The curves you posted are almost exactly those of a 12AX7 but with "Ip" multiplied by 2. There's a reason for that. For all practical purposes, each section of a 12BZ7 is almost exactly a 12AX7 with both sections paralleled. 12BZ7 gm is double that of 12AX7, rp=1/2, If=2x, u=100, etc. If the 12BZ7 has a weakness compared to the 12AX7 it's excessive microphonics. Every one I've tried to use was a microphone. YMMV
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: if 7B4 is the best driver tube for SE DC 2A3 ... - Steve O 21:51:36 03/01/17 (3)
- RE: if 7B4 is the best driver tube for SE DC 2A3 ... - drlowmu 22:59:37 03/01/17 (1)
- RE: if 7B4 is the best driver tube for SE DC 2A3 ... - Steve O 08:29:45 03/02/17 (0)
- RE: if 7B4 is the best driver tube for SE DC 2A3 ... - tube wrangler 22:54:33 03/01/17 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
