In Reply to: Opps!, ordered wrong value posted by Cousin Billy on January 3, 2016 at 07:08:11:
While you do go to 1Hz with 0.22, they don't sound as good otherwise, and with the 0.1 uf units, the squarewave tilt at 20Hz is unmeasurable. This means no phase shift at 20Hz, which is how you get impact.
Increasing the value will mess with the timing constants in the circuit which will increase the IMD.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- 0.1uf is the right value. - Ralph 11:10:41 01/05/16 (2)
- RE: 0.1uf is the right value. - Lew 05:10:47 01/08/16 (1)
- timing constants - Ralph 08:42:35 01/08/16 (0)