Home High Efficiency Speaker Asylum

Need speakers that can rock with just one watt? You found da place.

RE: Simply better

Better is a relative term here.

Sealed box will start rolling off earlier but at a gentler curve (-12dB/oct) while ported it will go flat to driver Fs and then drops rather rapidly at -24dB/oct.

You may run into problems ported because it is quite possible (but not necessarily so) that the port ends up rather large and the port tube must NOT be counted as part of the box volume.
Consequently it is quite possible that to get a box with a 6.5L volume net requires a gross volume of 10L just to be able to accommodate the port tube.
It may not be this way since I have not calculated the port needed but it is a distinct possibility.

However not too long ago I built some little 2ways for my daughter to take to Uni.
They are ported (I struggled but eventually found a suitably short tube design but it did need 3 smaller ports to make it all fit into a 6L box) and blocking the ports does only produce a subtle change in the bass.

With that in mind I'd go sealed. If you get the material cut to size you can knock up a pair in an afternoon rather than spending hours on WinISD calculating ports, trying to find a suitable tube, fitting it etc.

Also wideband drivers often make very good mids and if the driver turns out really nice you can add a woofer later and may be even a tweeter (note: I am a fan of 3way speakers).


This post is made possible by the generous support of people like you and our sponsors:
  Schiit Audio  


Follow Ups Full Thread
Follow Ups

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.