VK Music - Elekit & Triode Japan Forum
Welcome! Need support, you got it. Or share you ideas and experiences.
In Reply to: So... posted by Vinyl Valet on February 20, 2017 at 09:01:14:
Can't you or won't you answer my questions?
I did answer your QUESTIONS
I only recommend to upgrade 4 coupling caps (AMCO 0.1 X 4) and 4 cathode by pass caps (Sanyo OS-CON 180uf 16V). We tested our suggestion. It mentioned in THE MANUAL. YOU WANT TO USE 220uF. IT is your choice.
The link shows that there is a 220uf, 16V OS-CON. Why would you not recommend these capacitors (of any value, 180uf, 220uf, etc) for the output tubes after recommending them for the 12AU7 tubes? please refer to question 1
You say 220uf, 16V is too much capacitance for the output tube. Then why are 220uf, 16V capacitors included in the basic kit and a range of 150uf - 220uf is recommended in the instructions? If 220uf is too big, what value would your recommend for the outputs?
IT IS THE SIZE NOT THE CAPACITANCE. I only recommend to replace these 4 coupling caps and 4 cathode by pass cap.
Edits: 02/20/17This post is made possible by the generous support of people like you and our sponsors:
Topic - TU-8200 Cathode Bypass Caps - Vinyl Valet 16:46:06 02/17/17 (7)
- RE: TU-8200 Cathode Bypass Caps - vkung 17:46:47 02/17/17 (6)
- RE: TU-8200 Cathode Bypass Caps - Vinyl Valet 18:27:23 02/17/17 (5)Follow Ups
- RE: So... - vkung 09:25:50 02/20/17 (1)
- Thank you (nt) - Vinyl Valet 09:42:45 02/20/17 (0)