I need to come up with a RCA to RCA IC to go between a tonearm junction box and a phono preamp. I was wondering about just sliding the copper braid over my already built V-H Audio V-Twist and or his Fine Silver wire recipe? One thing it would accomplish is spacing the shield a bit away from the signal wire which may reduce capacitancestors I think. Thoughts?
This post is made possible by the generous support of people like you and our sponsors:
Topic - Phono Cable Shielding. - WntrMute2 07:34:40 01/09/17 (20)
- RE: Phono Cable Shielding. - sayntjack 09:20:49 03/23/17 (0)
- Two comments - Salectric 09:53:49 01/12/17 (6)
- RE: Two comments - WntrMute2 10:01:30 01/12/17 (5)
- RE: Two comments - Salectric 10:34:24 01/12/17 (2)
- the Belden 8402 specs doesn't seem to be so great - lovetube 20:36:45 01/16/17 (1)
- RE: the Belden 8402 specs doesn't seem to be so great - Duster 14:14:46 01/18/17 (0)
- Break in with only a 0.25v signal must take years and years? - 3+4=5 10:31:02 01/12/17 (1)
- RE: Break in with only a 0.25v signal must take years and years? - Salectric 10:41:04 01/12/17 (0)
- you only need "Phono Cable Shielding" if without it you have HUM... Just a thought. - 3+4=5 00:05:49 01/12/17 (0)
- RE: Phono Cable Shielding. - sayntjack 19:10:00 01/09/17 (2)
- RE: Phono Cable Shielding. - WntrMute2 23:40:41 01/09/17 (1)
- RE: Phono Cable Shielding. - sayntjack 17:37:12 01/10/17 (0)
- If you use MI or MM cartridges the capcitance of the cable can play a very large part.... - viridian 13:10:22 01/09/17 (1)
- RE: If you use MI or MM cartridges the capcitance of the cable can play a very large part.... - Duster 14:46:21 01/09/17 (0)
- RE: Phono Cable Shielding. - Duster 12:46:37 01/09/17 (2)
- RE: Phono Cable Shielding. - WntrMute2 13:22:02 01/09/17 (1)
- RE: Phono Cable Shielding. - Duster 14:34:52 01/09/17 (0)
- RE: Phono Cable Shielding. - dee eye why 11:51:40 01/09/17 (2)
- RE: Phono Cable Shielding. - WntrMute2 12:48:47 01/09/17 (1)
- RE: Phono Cable Shielding. - Duster 13:00:02 01/09/17 (0)