Home Cable Asylum

Interconnects, speaker wire, power cords. Ask the Cable Guys.

RE: DIY interconnects with DH Labs White Lightning Cable

One point I would make is that all three of the cables you have mentioned use different conductors for the Pos and Neg legs of the cable. The signal is a voltage potential between the two conductors so it makes sense to me that the two conductors should be identical. Those cables use a wire for the positive conductor and use the braided shield for the negative. Those two conductors have very different electrical characteristics. I just don't see why most cable manufacturers don't recognise this fact. I notice that DH Labs Pro Studio cables are constructed as I suggest. There are two identical conductors within the cable and there is also a shield. Anyway, thanks for bringing the DH Labs cables to my attention. I am going to make a pair of cables using the Pro Studio.


This post is made possible by the generous support of people like you and our sponsors:
  Sonic Craft  


Follow Ups Full Thread
Follow Ups
  • RE: DIY interconnects with DH Labs White Lightning Cable - Palustris 10:15:57 01/05/17 (0)

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.