Inmate Central Inmate Central, where civil and family-friendly discourse about off-audio topics (other than religion and politics) is welcome. |
|
In Reply to: RE: You're correct posted by pictureguy on March 5, 2017 at 13:43:53:
They are using 356 Aluminium which is an alloy for casting. the 4 digit ones are for wrought aluminium.
3xx cast aluminium contains silicon and copper or magnesium.
T6 means it is heat treated and artificially age-hardened.
After casting it is left to cool down and then it is heated to just below the melting point for a set time (an hour or so), quenched and then heated again to a lower temperature and kept at that for some time (quite few hours).
Although no doubt coincidental it is quite apt to use 356 Al for a motor that goes into a Porsche 356 of the same name. ;-)
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: You're correct - b.l.zeebub 08:46:56 03/06/17 (6)
- RE: You're correct - pictureguy 11:28:28 03/06/17 (5)
- RE: You're correct - b.l.zeebub 14:31:17 03/06/17 (4)
- RE: You're correct - pictureguy 14:55:57 03/06/17 (3)
- RE: You're correct - b.l.zeebub 07:13:03 03/07/17 (2)
- RE: You're correct - pictureguy 11:53:21 03/07/17 (1)
- RE: You're correct - b.l.zeebub 01:37:59 03/08/17 (0)