In Reply to: Re: A "The Smaller Advent" problem. posted by Gordy on December 31, 2003 at 19:06:28:
I removed the woofer from the cabinet and wired directly to the
woofer. Same results, good sounding music, but a buzz that is
very easy to hear. To answer one of the other post, I didnot
remove the dust cover and shim the coil. I was told by the
folks that I got the surrounds from that this speaker has
a loose tolerance and would probably not need shimming. If
I don't get any other suggestions I will work the surround
loose at the outer rim, remove the dust cover and start over.
Still wondering how the cone can move freely and the coil be
the problem. Is there anything to look for when the dust cover
is off?
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: A "The Smaller Advent" problem. - mac d 19:23:43 12/31/03 (2)
- Re: A "The Smaller Advent" problem. - CUlater 12:33:47 01/01/04 (0)
- Re: A "The Smaller Advent" problem. - Gordy 00:09:10 01/01/04 (0)