In Reply to: Fisher X-200 Bias Question posted by DHJ on December 30, 2003 at 08:37:13:
Dave,When you reduce standing current(output bias)the B+ will rise.The PS can caps and others will be working at their limit(leakage current)because of this and you'll get hum.If you replace the doubler caps,use sections rated at 350-450 vdc.When replacing 500vdc sections it may be OK to use new 500 vdc units but try to use 525vdc sections if possible to replace them.
Good Luck
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Fisher X-200 Bias Question - scrooie looie 09:48:14 12/30/03 (0)