|
Vintage Asylum Classic gear from yesteryear; vintage audio standing the test of time. |
|
|
|
Vintage Asylum Classic gear from yesteryear; vintage audio standing the test of time. |
|
In Reply to: Re: Looks like you need.... posted by Russ57 on December 30, 2003 at 06:30:05:
Hi Russ,
thank you for the infos.
What about C2 (C24 in your schematic)? It's the one with 30uf/400V + 20uf/400V + 5uf2/50V. Should be replaced as well? So all three the multisection caps should be replaced?
Please explain me again the "positive ground" thing: if I use some separate electrolytic caps to replace the multi-can, I have to wire together all the positives to make a single ground with them and use the negatives to connect the various wires now connected to the "figures" (square, triangle, etc.)?
Thanks
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- And what about the third multi-cap? - Raver 06:49:45 12/30/03 (7)
- Re: Caution! - Russ57 11:29:40 12/30/03 (6)
- Re: Caution! - Raver 12:04:20 12/30/03 (5)
- I just realized I have a wrong schematics! - Raver 14:59:00 12/30/03 (4)
- That's it, you didn't read very carefully on my listing below for diodes - koo 16:25:43 12/30/03 (3)
- Re: That's it, you didn't read very carefully on my listing below for diodes - Raver 01:51:52 12/31/03 (0)
- Re: That's it, you didn't read very carefully on my listing below for diodes - Raver 01:50:45 12/31/03 (1)
- My apology too, being too assertive, just want to make things right - koo 16:32:15 01/01/04 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
