In Reply to: There were a few posts a few years ago from Mike Samra posted by 1973shovel on May 14, 2017 at 08:39:55:
This was an SP3A1 and I had used a pair of 820uf Panasonics and FT caps downstream and GI diodes.I used RN65s grid to ground and a mix K40Y pio caps and film caps. It is fantastic and you could measure no ripple on the collector of the regulator even at the lowest setting on the scope.
"For every complex problem there is an answer that is clear, simple, and wrong" H. L. Mencken
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- I basically McShaned it and it worked very well. - Michael Samra 20:30:13 05/14/17 (18)
- There's no substitute for stiff power supplies - E-Stat 19:19:26 05/15/17 (2)
- RE: There's no substitute for stiff power supplies - Michael Samra 15:41:23 05/17/17 (1)
- RE: There's no substitute for stiff power supplies - PakProtector 02:36:50 05/18/17 (0)
- Thanks Mike! - 1973shovel 08:01:07 05/15/17 (0)
- RE: I basically McShaned it and it worked very well. - fredtr 06:44:33 05/15/17 (13)
- RE: I basically McShaned it and it worked very well. - mark.korda@myfairpoint.net 08:41:00 05/15/17 (12)
- RE: I basically McShaned it and it worked very well. - fredtr 11:36:44 05/15/17 (10)
- Really? - 1973shovel 11:54:49 05/15/17 (9)
- RE: Really? - Uncle Mike 14:15:11 05/15/17 (1)
- Thank you - 1973shovel 16:13:00 05/15/17 (0)
- RE: Really? - fredtr 13:18:17 05/15/17 (6)
- Strippers - 1973shovel 16:07:40 05/15/17 (5)
- RE: Strippers - mark.korda@myfairpoint.net 16:36:56 05/15/17 (4)
- Last Pas by David Vorhis - 1973shovel 05:14:10 05/16/17 (3)
- RE: Last Pas by David Vorhis - mark.korda@myfairpoint.net 15:10:49 05/17/17 (2)
- RE: Last Pas by David Vorhis - 1973shovel 05:16:12 05/19/17 (1)
- RE: Last Pas by David Vorhis - mark.korda@myfairpoint.net 13:33:22 05/20/17 (0)
- Mark - 1973shovel 10:43:21 05/15/17 (0)