RE: Vintage Power Cords

Posted by mark.korda@myfairpoint.net (A) on February 1, 2017 at 17:33:36

In Reply to: RE: Vintage Power Cords posted by samstone on February 1, 2017 at 17:13:36:

Absolute Phase, I'll etch that in Samstone.
Stone, that was the easiest answer, thanks. All the rest of you too.
One thing I found out about the Dyna-35 was that the cage was too small. It touches my quad cap, same size as the original, and in some instances the transformers. I'm going to re drill the mounting holes, lower. I had a 5 pound York barbell plate on my cage to stop a hum until Steve from Texas told me about the cage thing. Thanks for the info from all. This is the stuff you can't easily find in a book.....Mark K.

This post is made possible by the generous support of people like you and our sponsors:

Follow Ups Full Thread

Topic - Vintage Power Cords - mark.korda@myfairpoint.net 05:38:07 01/31/17 (23)

Check out this old article in the Bound For Sound journal . . . nt - alaskahiatt 09:12:35 02/02/17 (0)

OMG!!! Answer the question please!!! - samstone 17:08:37 02/01/17 (2)

Some components need 3 tests - M3 lover 09:23:59 02/02/17 (1)

RE: Some components need 3 tests - samstone 18:14:57 02/03/17 (0)

RE: Vintage Power Cords - Palustris 11:17:14 01/31/17 (2)

RE: Vintage Power Cords - samstone 17:13:36 02/01/17 (1)

RE: Vintage Power Cords - mark.korda@myfairpoint.net 17:33:36 02/01/17 (0)

Alrighty then - E-Stat 06:18:02 01/31/17 (15)

RE: Easily measurable stuff here - BigguyinATL 13:38:53 02/01/17 (0)

RE: Alrighty then - airtime 07:49:19 01/31/17 (13)

RE: Alrighty then - E-Stat 08:58:39 01/31/17 (6)

RE: Alrighty then - sony6060 10:29:03 01/31/17 (5)

That's a start - E-Stat 10:36:04 01/31/17 (4)

RE: That's a start - mark.korda@myfairpoint.net 11:00:48 01/31/17 (3)

RE: That's a start - Steve O 12:47:39 01/31/17 (0)

RE: That's a start - fredtr 11:56:03 01/31/17 (0)

RE: That's a start - airtime 11:15:29 01/31/17 (0)

RE: Alrighty then - Coner 08:33:02 01/31/17 (1)

Such exists - E-Stat 08:51:36 01/31/17 (0)

RE: Alrighty then - Uncle Mike 08:32:13 01/31/17 (3)

RE: Alrighty then - airtime 08:42:55 01/31/17 (2)

It is... - Uncle Mike 13:44:36 01/31/17 (1)

RE: It is... - mark.korda@myfairpoint.net 05:49:00 02/01/17 (0)

Follow Ups

RE: Vintage Power Cords - mark.korda@myfairpoint.net 17:33:36 02/01/17 (0)

RE: Vintage Power Cords

Post a Message!