|
Vintage Asylum Classic gear from yesteryear; vintage audio standing the test of time. |
|
|
|
Vintage Asylum Classic gear from yesteryear; vintage audio standing the test of time. |
|
In Reply to: Anyone recognize this transformer? I got a couple from posted by bcguitar on January 13, 2017 at 07:25:31:
The black and black/white are your primaries.You plug an AC cord into those wires and then plug it into your variac and then set your variac to half of your measured line voltage.Put your meter on your highest AC volts setting and start measuring.I tell you put it at half just for safety and then just double the readings you get.Take a reading on the green and green and white wires which I assume are 6.3vac.At half setting,they may read close to 3.8vac as they are unloaded.Then try the the blue which may be another 6.3vac tap.You can also measure resistance between the wires..Not while it's plugged in of course.
"For every complex problem there is an answer that is clear, simple, and wrong" H. L. Mencken
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Try this - Michael Samra 23:12:27 01/13/17 (1)
- RE: Try this - sony6060 07:05:59 01/14/17 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
