|
Vintage Asylum Classic gear from yesteryear; vintage audio standing the test of time. |
|
|
|
Vintage Asylum Classic gear from yesteryear; vintage audio standing the test of time. |
|
In Reply to: Two Scott 299s to one pair posted by jack3 on January 4, 2017 at 10:13:01:
You should be able to "strap" the two channels together- Common to Common, and, say 8 ohm taps to each other - channel a to channel b- on one chassis- and then you will be getting the combined output into one set of speakers-
Connect the speakers to the Common and the 'strapped' tap (* ohm in example)
Remember that the actual impedance is now halved- so the 8 ohm tabs are really 4 ohms, so if you have 8 ohm speakers - strap the 16 ohm taps...
Good luck
Happy Listening
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Two Scott 299s to one pair - 6bq5 15:14:06 01/04/17 (1)
- RE: Two Scott 299s to one pair - Eli Duttman 15:36:45 01/04/17 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
