In Reply to: Hey Michael, what do you recommend for cleaning... posted by gkargreen on January 3, 2017 at 09:43:05:
I clean the bearings of the tuning capacitor with Dexoit D5 or equivalent.You only put a drop or two on each bearing on the tuning capacitor and then work it back and forth..Then you put a drop of turbine oil on each bearing and then work it back and forth down the tuning scale the same way.
You also can do this same procedure for the tuning shaft that holds your knob that's froze up.Here is the oil I use and it's superb.I use it on my furnace motor as well.
"For every complex problem there is an answer that is clear, simple, and wrong" H. L. Mencken
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Hey Michael, what do you recommend for cleaning... - Michael Samra 11:56:48 01/03/17 (4)
- Thanks, Michael, can I ask another question about - gkargreen 14:12:02 01/04/17 (0)
- RE: Hey Michael, what do you recommend for cleaning... - gkargreen 13:31:38 01/03/17 (2)
- RE: Hey Michael, what do you recommend for cleaning... - Michael Samra 16:31:29 01/03/17 (1)
- Where do you get those brass tube pin cleaner brushes - airtime 06:37:45 01/04/17 (0)