In Reply to: Fisher KX200 runs too hot posted by MIrving on February 21, 2009 at 05:28:46:
Are you able to bias it normally? You might try a lower idle current. I would drop the 7591 grid resistor value from 270K to 150K and up the output coupling caps from .047 to 0.1 uF. But this won't help unless you have a tube with grid leakage (rumor has it that modern ones have a bit more leakage than the old ones did).
I have a scan of the service manual if you need it... tbavis(at)rochester(dot)rr(dot)com
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Fisher KX200 runs too hot - Tom Bavis 13:10:35 02/21/09 (0)