Check the grounds

Vintage Asylum

Classic gear from yesteryear; vintage audio standing the test of time.

In Reply to: 299 C problem - hum posted by anti-doom on April 3, 2007 at 14:53:37:

If your 299 uses a ground that is attached to a tag strip, which is then riveted to the chassis, there could be some corrosion that is making the ground less than ideal.
I have had to tie all the grounds together to a central point on some old gear to chase down hum problems.
--
Al G
Born To Tinker!

This post is made possible by the generous support of people like you and our sponsors:

Signature Sound

[ Signature Sound Lounge ]

Follow Ups Full Thread

Topic - 299 C problem - hum - anti-doom 14:53:37 04/03/07 (4)

Re: 299 C problem - hum - anti-doom 23:38:44 04/03/07 (1)

Re: 299 C problem - hum - Ron Oehlert 11:53:49 04/05/07 (0)

Re: 299 C problem - hum - Michael Samra 23:13:59 04/03/07 (0)

Check the grounds - anumber1 20:34:56 04/03/07 (0)

Follow Ups

Check the grounds - anumber1 20:34:56 04/03/07 (0)

You can not post to an archived thread.