|
Radio Road Which tuner to get and getting the most from it. Thank God, for the radio! |
|
|
|
Radio Road Which tuner to get and getting the most from it. Thank God, for the radio! |
|
I've made two different circuits to receive RF using LM386 but they doesn't work. I've changed the values of C2 and L1 to change the frequency. I've also changed the gain but nothing happens.
The problem is that I hear a sound of noise or buzz from the speaker. When I touch Pin 3 (The input) or the Antenna, The sound become higher but anyway no radio station is received.
I've made a radio transmitter using a transistor before so, I turned it on. The receiver circuit received the song Which is the input of the transmitter. It receives no matter the values of the C2 and L1 of the Tank circuit so, I removed the tank circuit and connected the antenna directly to pin 3 and It also works receive the song.
Why it doesn't receive any radio station although it receive the signals that are transmitted by the transmitter circuit that I've made ?
What can I do to receive radio stations ? ( I live in area Where I can receive good radio stations AM and FM from my cell phone and Radio device )
Here is the details of the IC :
This post is made possible by the generous support of people like you and our sponsors:
Topic - Why can't I receive radio waves using LM386? - soda156 17:56:38 01/15/17 (5)
- RE: Why can't I receive radio waves using LM386? - hifipaul 20:00:28 01/15/17 (4)
- RE: Why can't I receive radio waves using LM386? - Eli Duttman 20:38:22 01/15/17 (3)
- It's almost a crude crystal radio but the tuning portion is connected wrong.... - Steve O 21:38:42 01/15/17 (2)
- RE: It's almost a crude crystal radio but the tuning portion is connected wrong.... - Eli Duttman 00:08:12 01/16/17 (1)
- RE: It's almost a crude crystal radio but the tuning portion is connected wrong.... - Jim Doyle 20:03:18 02/10/17 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
