|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Thank you Allen posted by Russ57 on June 17, 2005 at 05:46:08:
If you add a choke, it will reduce the voltage and reduce the transformer current. So you can up the bias current to move further into class A. Of course you sacrifice power at the lower voltage, though that doesn't seem to be an issue. And you can add cathode resistors and still have variable bias (negative voltage will be much less - might have to tweak bias circuit values).12BH7 has considerably less gain than 12AT7, so open loop gain will be lower, effectively reducing the amount of feedback. Can't see how it would hurt to try it, but I don't know enough about the circuit to predict the results...
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Thank you Allen - Tom Bavis 06:23:39 06/17/05 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
