Home Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

Re: input transformer loading

Have you tried it unloaded? Try a staight in from the transformer secondary to grid with no shunt resistor. Then look at the waveform. If there is still ringing then you can try a capacitor and a resistor in series from grid to ground but this is going to have to be determined by experiment with a substitution cap and resistor boxes. James


This post is made possible by the generous support of people like you and our sponsors:
  Signature Sound   [ Signature Sound Lounge ]


Follow Ups Full Thread
Follow Ups


You can not post to an archived thread.