|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: RE: Thomas stereo organ amplifier 6973 to 6cz5 conversion posted by Tre' on January 16, 2022 at 06:29:48:
I had a conversation about this with someone last year. It was (and still is) my contention that "grid leak" is a misnomer unless the resistor's value is so high that grid leak bias is produced. But wouldn't you know, in the course of researching this further after the fact, I proved myself wrong. Don't remember the source now, but I came across an instance of a tube manufacturer using "grid leak resistor" for a simple, low value grid resistor to ground. The reference was from the '60s or earlier. Go figure.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Agree - "grid resistor" - but then again... - Triode_Kingdom 11:28:23 01/16/22 (6)
- RE: Agree - "grid resistor" - but then again... - Paul Barker 23:14:30 01/16/22 (5)
- That's called "dumbing down" - Triode_Kingdom 10:11:12 01/18/22 (4)
- RE: That's called "dumbing down" - joshie 07:54:55 01/22/22 (3)
- RE: That's called "dumbing down" - joshie 08:24:03 01/22/22 (2)
- RE: That's called "dumbing down" - Tre' 16:35:27 01/22/22 (1)
- RE: That's called "dumbing down" - joshie 16:35:35 01/29/22 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
