In Reply to: 'K' type film caps... posted by Ivan303 on May 7, 2021 at 18:30:40:
Other than a few small caps and resistors, that's about it.
10H choke is mounted on the top next to the power and output transformer.
Have some insulation paper on order that I will lay down under the caps as those leads are REALLY close to the edges and shorts to the chassis is not desirable.
First they came for the dumb-asses
And I did not speak out
Because I was not a dumb-ass
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- And yes, it all fits... - Ivan303 19:03:03 05/08/21 (7)
- RE: a couple questions - awsjr 03:31:42 05/10/21 (6)
- IIRC, the input to the Tent Labs supply will just short of 6VAC... - Ivan303 05:28:09 05/10/21 (3)
- RE: IIRC, the input to the Tent Labs supply will just short of 6VAC... - awsjr 05:45:15 05/10/21 (1)
- Keeping in mind I have not tried it as yet... - Ivan303 05:57:43 05/10/21 (0)
- RE: IIRC, the input to the Tent Labs supply will just short of 6VAC... - Boli46 05:34:26 05/10/21 (0)
- RE: a couple questions - Boli46 05:22:16 05/10/21 (1)
- If they cost a bit more.... - Ivan303 05:33:04 05/10/21 (0)