In Reply to: Test point advice please posted by 91derlust on July 13, 2017 at 00:59:05:
Thanks guys.
Based on your comments:
- I won't implement the jacks to the plate resistor (not really needed). this will help avoid the potential for noise in a high impedance part of the circuit.
- I'll add a 10 Ohm resistor to the driver cathode resistor chain and wire jacks to both sides. This will be in a low impedance part of the circuit and still allow me to measure the V-drop and calculate the driver stage current, which are the main reasons for the test points.
Cheers,
91.
"Confusion of goals and perfection of means seems to characterise our age." Albert Einstein
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Test point advice please - 91derlust 21:29:09 07/13/17 (0)