Home Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

RE: 400 ohms/0.4 volts gives 1 ma of current

No grid was harmed in this experiment. Output was connected to secondary of IT I intend to use in a yet to be constructed amp. What I did initially was connect the negative output to one end of the winding and the positive end of the supply to the other of the winding. I then attached the meter one lead to each end of the winding. This is what gave me -0.4 volts. After my first post I connected one end of the winding to the negative output and the other to the red lead of the meter and the black lead of the meter connected to the positive ground of the supply. I was able to adjust this to the -32 volts I wanted. Hope this clarifies things.


This post is made possible by the generous support of people like you and our sponsors:
  Amplified Parts  


Follow Ups Full Thread
Follow Ups
  • RE: 400 ohms/0.4 volts gives 1 ma of current - vetmedrobert@gmail.com 12:50:57 06/27/17 (0)

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.