|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: RE: What about a rotary switch. posted by Tre' on June 19, 2017 at 19:31:44:
First things first, there's a good chance the meter will have no impact on sonics. Measure it's resistance before going to the trouble of adding a switch. It might be only a few ohms. If it turns out that's not the case, there's no reason to switch it out of circuit when it's not needed. Just leave it in series with the cathode and add a switch in parallel to bypass it to ground. Nothing more is needed.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- You guys are making this way too hard! - Triode_Kingdom 22:14:37 06/19/17 (3)
- how do i measure both channels - DAK 10:32:25 06/20/17 (1)
- RE: how do i measure both channels - Triode_Kingdom 12:00:18 06/20/17 (0)
- Doh (nt) - Tre' 07:35:34 06/20/17 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
