In Reply to: RE: Here is the schematic for one channel ..... posted by Triode_Kingdom on June 4, 2017 at 08:43:02:
"That's an unusual treatment of the suppressor grid"
I think vinnie just left out the cathodes. G3 connects to the cathode.
Also I'm guessing the G2 of the output tube connects to the plate.
While I'm at it, using a 47uf cathode bypass cap instead of a 470uf cathode bypass cap was probably ill advised if the amp was being used full range.
Tre'
Have Fun and Enjoy the Music
"Still Working the Problem"
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Here is the schematic for one channel ..... - Tre' 09:35:57 06/04/17 (13)
- RE: Here is the schematic for one channel ..... - vinnie2 09:47:38 06/04/17 (12)
- RE: Here is the schematic for one channel ..... - Tre' 11:07:32 06/04/17 (11)
- RE: Here is the schematic for one channel ..... - vinnie2 12:17:35 06/04/17 (0)
- RE: Here is the schematic for one channel ..... - Triode_Kingdom 11:44:20 06/04/17 (9)
- RE: Here is the schematic for one channel ..... - Tre' 12:15:48 06/04/17 (0)
- RE: Here is the schematic for one channel ..... - vinnie2 12:15:42 06/04/17 (7)
- RE: Here is the schematic for one channel ..... - Tre' 12:19:21 06/04/17 (6)
- RE: Here is the schematic for one channel ..... - vinnie2 14:02:33 06/04/17 (5)
- RE: Here is the schematic for one channel ..... - Tre' 15:41:18 06/04/17 (4)
- RE: Here is the schematic for one channel ..... - vinnie2 16:25:42 06/04/17 (3)
- RE: Here is the schematic for one channel ..... - Triode_Kingdom 06:35:03 06/05/17 (1)
- RE: Here is the schematic for one channel ..... - vinnie2 15:14:51 06/05/17 (0)
- RE: Here is the schematic for one channel ..... - Tre' 16:55:19 06/04/17 (0)