Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: That's Exactly What I Did posted by Triode_Kingdom on May 17, 2017 at 07:54:41:
It has been some time since I tried this...but I recall picking a resistor that left 80% of the signal voltage across the choke at its self resonant point. This of course being the parallel LC point that delivers a peak...
I did not find one I was not disappointed in...LOL
cheers,
Douglas
Friend, I would not hurt thee for the world...but thou art standing where I am about to shoot.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups Full ThreadTopic - Cathode Follower Line Stage - Triode_Kingdom 19:10:47 05/15/17 (136)
- Final Tube Type Tested - Triode_Kingdom 23:15:23 05/22/17 (1)
- RE: Final Tube Type Tested - PakProtector 01:53:56 06/08/17 (0)
- First Bench Test - Triode_Kingdom 21:50:22 05/19/17 (38)
- Of course you wouldn't need a negative bias supply with 2.3k on the cathode. - Michael Samra 17:06:50 05/22/17 (4)
- RE: Of course you wouldn't need a negative bias supply with 2.3k on the cathode. - Triode_Kingdom 22:51:00 05/22/17 (3)
- RE: Of course you wouldn't need a negative bias supply with 2.3k on the cathode. - Michael Samra 04:26:28 05/23/17 (2)
- RE: Of course you wouldn't need a negative bias supply with 2.3k on the cathode. - Triode_Kingdom 06:31:52 05/23/17 (1)
- Ah ok. - Michael Samra 11:49:59 05/23/17 (0)
- RE: First Bench Test - vinnie2 09:11:00 05/20/17 (32)
- RE: First Bench Test - Triode_Kingdom 17:03:40 05/21/17 (31)
- RE: First Bench Test - vinnie2 18:29:01 05/21/17 (1)
- RE: First Bench Test - Triode_Kingdom 07:19:53 05/22/17 (0)
- RE: First Bench Test - PakProtector 17:59:35 05/21/17 (28)
- RE: First Bench Test - Tre' 14:00:25 05/24/17 (1)
- Sure... - PakProtector 11:11:27 05/26/17 (0)
- RE: First Bench Test - Triode_Kingdom 06:39:50 05/22/17 (25)
- RE: First Bench Test - PakProtector 09:37:23 05/22/17 (24)
- RE: First Bench Test - Triode_Kingdom 10:16:06 05/22/17 (23)
- RE: First Bench Test - Tre' 16:15:00 05/25/17 (17)
- RE: First Bench Test - Triode_Kingdom 22:55:44 05/25/17 (16)
- RE: First Bench Test - Tre' 08:17:22 05/26/17 (15)
- RE: First Bench Test - Triode_Kingdom 10:14:29 05/26/17 (14)
- AC Current Path (Diagrams) - Triode_Kingdom 23:26:52 05/26/17 (13)
- Thank you and one more question. - Tre' 07:53:30 05/27/17 (12)
- Mu Follower Current - Triode_Kingdom 11:15:07 05/27/17 (11)
- I'm starting to get a picture different than I thought it was - Tre' 19:49:45 05/27/17 (10)
- RE: I'm starting to get a picture different than I thought it was - Triode_Kingdom 01:36:20 05/28/17 (9)
- RE: I'm starting to get a picture different than I thought it was - Tre' 10:34:20 05/28/17 (6)
- Tubes and Solid State - Triode_Kingdom 12:01:55 05/28/17 (5)
- Point taken but.... - Tre' 13:02:23 05/28/17 (4)
- RE: Point taken but.... - PakProtector 04:59:16 05/29/17 (0)
- RE: Point taken but.... - Triode_Kingdom 14:02:34 05/28/17 (2)
- Thank you again. (nt) - Tre' 14:24:03 05/28/17 (1)
- You're welcome, it was helpful to me as well - Triode_Kingdom 15:55:13 05/28/17 (0)
- RE: I'm starting to get a picture different than I thought it was - Tre' 07:17:56 05/28/17 (1)
- RE: I'm starting to get a picture different than I thought it was - Triode_Kingdom 08:20:48 05/28/17 (0)
- RE: First Bench Test - PakProtector 13:26:26 05/22/17 (4)
- RE: First Bench Test - Triode_Kingdom 22:41:51 05/22/17 (1)
- sure ya did... - PakProtector 01:56:34 05/23/17 (0)
- RE: First Bench Test - Triode_Kingdom 16:29:39 05/22/17 (1)
- RE: First Bench Test - PakProtector 16:33:32 05/22/17 (0)
- RE: Cathode Follower Line Stage - John Elison 00:42:59 05/18/17 (13)
- RE: Cathode Follower Line Stage - floydandrews 12:03:18 05/18/17 (0)
- RE: Cathode Follower Line Stage - hagustos 09:30:23 05/18/17 (1)
- Thank you! I appreciate the information. /nt\ - John Elison 09:54:34 05/18/17 (0)
- RE: Cathode Follower Line Stage - Tre' 08:54:38 05/18/17 (9)
- Tre', What's up with R6? - Lew 11:32:19 05/20/17 (7)
- RE: Tre', What's up with R6? - Tre' 22:37:35 05/20/17 (6)
- RE: Tre', What's up with R6? - Steve O 06:07:44 05/21/17 (5)
- RE: Tre', What's up with R6? - Tre' 07:58:31 05/21/17 (4)
- RE: Tre', What's up with R6? - Steve O 09:55:17 05/21/17 (2)
- John Broskie's - Tre' 14:33:40 05/21/17 (1)
- John Broskie and Cathode Followers - Triode_Kingdom 17:01:57 05/21/17 (0)
- RE: Tre', What's up with R6? - Lew 09:44:07 05/21/17 (0)
- RE: Cathode Follower Line Stage - John Elison 09:39:12 05/18/17 (0)
- Better Tube Choices - Triode_Kingdom 21:18:18 05/17/17 (3)
- RE: Better Tube Choices - Eli Duttman 23:45:32 05/17/17 (2)
- RE: Better Tube Choices - Triode_Kingdom 08:10:55 05/18/17 (1)
- Even More Possibilities - Triode_Kingdom 08:30:19 05/18/17 (0)
- RE: Cathode Follower Line Stage - amnesiac 05:40:42 05/17/17 (0)
- When you mentioned triode connecting the 6W6s,it brought back memories of the Altec 1570 - Michael Samra 03:04:44 05/17/17 (16)
- I'll probably end up with 'SN7s - Triode_Kingdom 08:19:21 05/17/17 (15)
- RE: I'll probably end up with 'SN7s - Michael Samra 16:36:30 05/18/17 (12)
- Standalone Control Amp - Triode_Kingdom 22:02:52 05/18/17 (11)
- Why go thru all that?. Get an HK Citation 1 and be done with it. - Michael Samra 22:58:36 05/18/17 (10)
- RE: Why go thru all that?. Get an HK Citation 1 and be done with it. - PakProtector 03:44:01 05/19/17 (8)
- It depends. - Michael Samra 13:51:47 05/19/17 (7)
- anode follower? Interesting, is the 4 anode follower as well?~nT - Cleantimestream 15:22:09 05/19/17 (1)
- RE: anode follower? Interesting, is the 4 anode follower as well?~nT - Michael Samra 15:31:48 05/19/17 (0)
- RE: It depends. - Triode_Kingdom 14:24:29 05/19/17 (4)
- Here is what you can do - Michael Samra 04:26:15 05/20/17 (3)
- Here is that Chinese reissue that was copy of the original Cit 1 - Michael Samra 04:44:57 05/20/17 (2)
- Please put it out of its misery, Mikey (nt) - Triode_Kingdom 18:32:36 05/20/17 (1)
- I would love to. - Michael Samra 21:44:06 05/21/17 (0)
- Because I can do better (nt) - Triode_Kingdom 00:30:53 05/19/17 (0)
- RE: I'll probably end up with 'SN7s - PakProtector 14:32:35 05/18/17 (1)
- I take it all back - Triode_Kingdom 21:56:59 05/18/17 (0)
- RE: Cathode Follower Line Stage - sideliner 07:29:47 05/16/17 (4)
- RE: Cathode Follower Line Stage - Triode_Kingdom 10:05:46 05/16/17 (3)
- RE: Cathode Follower Line Stage - sideliner 12:46:30 05/16/17 (2)
- Cathode Bias - Triode_Kingdom 20:27:40 05/16/17 (0)
- RE: Cathode Follower Line Stage - Tre' 15:20:28 05/16/17 (0)
- RE: Cathode Follower Line Stage - vinnie2 04:05:41 05/16/17 (15)
- RE: Cathode Follower Line Stage - Triode_Kingdom 10:24:08 05/16/17 (6)
- RE: Cathode Follower Line Stage - vinnie2 14:48:29 05/16/17 (4)
- Pots - Triode_Kingdom 08:05:53 05/17/17 (1)
- RE: Pots - vinnie2 09:46:42 05/17/17 (0)
- RE: Cathode Follower Line Stage - Tre' 08:04:36 05/17/17 (1)
- RE: Cathode Follower Line Stage - vinnie2 09:43:29 05/17/17 (0)
- RE: Cathode Follower Line Stage - Eli Duttman 10:33:17 05/16/17 (0)
- RE: Cathode Follower Line Stage - Iain42 08:45:16 05/16/17 (7)
- "Or use an autoformer based volume control" +1 (nt) - Tre' 08:07:37 05/17/17 (6)
- Yeah, but ............ - vinnie2 09:53:23 05/17/17 (5)
- RE: Yeah, but ............ - amnesiac 22:31:26 05/17/17 (1)
- RE: Yeah, but ............ - PakProtector 04:25:15 05/20/17 (0)
- You have a point there. (nt) - Tre' 11:13:18 05/17/17 (2)
- Yeah Butt much mo better nt - Iain42 11:57:00 05/17/17 (1)
- RE: Yeah Butt much mo better nt - vinnie2 14:46:44 05/17/17 (0)
- RE: Cathode Follower Line Stage - PakProtector 02:50:02 05/16/17 (37)
- Resonance - Triode_Kingdom 07:28:49 05/16/17 (36)
- RE: Resonance - PakProtector 09:38:27 05/16/17 (35)
- RE: Resonance - Triode_Kingdom 10:10:42 05/16/17 (34)
- RE: Resonance - PakProtector 10:39:27 05/16/17 (0)
- Dip - Eli Duttman 10:24:06 05/16/17 (32)
- RE: Dip - Triode_Kingdom 10:28:35 05/16/17 (31)
- RE: Dip - PakProtector 10:37:48 05/16/17 (30)
- RE: Dip - Triode_Kingdom 20:32:05 05/16/17 (29)
- RE: Dip - dave slagle 07:16:32 05/17/17 (28)
- That's Exactly What I Did - Triode_Kingdom 07:54:41 05/17/17 (27)
- RE: That's Exactly What I Did - Lew 10:43:18 05/17/17 (0)
- RE: That's Exactly What I Did - PakProtector 09:32:58 05/17/17 (2)
- RE: That's Exactly What I Did - Triode_Kingdom 10:09:09 05/17/17 (1)
- RE: That's Exactly What I Did - PakProtector 16:27:48 05/17/17 (0)
- RE: That's Exactly What I Did - dave slagle 09:30:53 05/17/17 (21)
- RE: That's Exactly What I Did - Triode_Kingdom 10:48:37 05/17/17 (20)
- RE: That's Exactly What I Did - dave slagle 12:08:27 05/17/17 (19)
- Choke VS CCS - Triode_Kingdom 21:19:45 05/17/17 (15)
- You can build a very decent CCS with a tube in cascode,.. - Lew 07:46:14 05/18/17 (12)
- It won't equal a choke... - Triode_Kingdom 16:02:03 05/18/17 (11)
- What's the DCR of L1 and where could I find such a choke to try? - Lew 20:01:54 07/10/19 (0)
- If what you say is true,... - Lew 07:06:08 05/19/17 (5)
- on the tube CCS... - PakProtector 12:55:25 05/19/17 (3)
- Always wondered about using a pentode as CCS - Lew 11:34:27 05/20/17 (2)
- RE: Always wondered about using a pentode as CCS - PakProtector 04:48:30 05/22/17 (1)
- Sorry. I usually think of a pentode as a cascode-in-one - Lew 08:21:32 05/22/17 (0)
- RE: If what you say is true,... - Triode_Kingdom 08:45:49 05/19/17 (0)
- RE: It won't equal a choke... - cpotl 01:10:50 05/19/17 (3)
- RE: It won't equal a choke... - Triode_Kingdom 08:08:11 05/19/17 (1)
- RE: It won't equal a choke... - cpotl 08:21:28 05/19/17 (0)
- RE: It won't equal a choke... - PakProtector 03:49:51 05/19/17 (0)
- RE: Choke VS CCS - dave slagle 04:50:18 05/18/17 (1)
- RE: Choke VS CCS - PakProtector 05:29:26 05/18/17 (0)
- RE: That's Exactly What I Did - Eli Duttman 13:23:23 05/17/17 (2)
- RE: That's Exactly What I Did - PakProtector 16:32:53 05/17/17 (1)
- RE: That's Exactly What I Did - Triode_Kingdom 05:43:38 05/18/17 (0)
- RE: That's Exactly What I Did - Eli Duttman 08:48:45 05/17/17 (0)
Follow Ups
- RE: That's Exactly What I Did - PakProtector 09:32:58 05/17/17 (2)
- RE: That's Exactly What I Did - Triode_Kingdom 10:09:09 05/17/17 (1)
- RE: That's Exactly What I Did - PakProtector 16:27:48 05/17/17 (0)