|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: RE: CLC / Snubbers posted by Eli Duttman on April 1, 2017 at 14:23:35:
According to my sim, the original Cit II PS has a significant impedance bump around 25-30 Hz. That's due to the factory values for the choke and reservoir cap. Making the reservoir larger mitigates that issue. Anyway, this is very different than what I thought you were describing when you mentioned adding a hash filter. The model I posted is valid for that, but it doesn't include a large smoothing capacitor (reservoir) afterwards. I might have to bite the bullet and take the same approach in my rebuilds. The 500mH chokes will work if I do that, it's just a matter of adding enough output capacitance to push the resonance bump to a lower frequency. Good discussion, thanks!
Edits: 04/01/17
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: CLC / Snubbers - Triode_Kingdom 14:48:21 04/01/17 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
