|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Gain Stage for Wurlitzer 6420 6L6 tube amp posted by mr9iron on February 18, 2017 at 15:45:52:
What is the voltage output of the device you are attaching to this amp? Reason I ask, is some of these organ units had pre-amps (with tone and volume controls) prior to the main amp. If you have a unit that has more voltage output, maybe the amp will work better.
Guys that resurrect PA and organ amps for guitar amp use sometimes need a pre-amp box that puts out voltage-range output, for the vintage PA or organ amp to work okay.
Just a thought...
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Gain Stage for Wurlitzer 6420 6L6 tube amp - FenderLover 18:29:45 02/18/17 (5)
- RE: Gain Stage for Wurlitzer 6420 6L6 tube amp - mr9iron 13:28:11 02/19/17 (4)
- If used as a guitar power amp - Ralph 12:36:26 02/21/17 (1)
- RE: If used as a guitar power amp - mr9iron 14:01:08 02/21/17 (0)
- Ask him if he has a pedal that has gain/drive control - FenderLover 17:16:36 02/19/17 (1)
- RE: Ask him if he has a pedal that has gain/drive control - mr9iron 01:39:02 02/22/17 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
