|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: RE: Octals-med mu, low plate R posted by Eli Duttman on January 3, 2017 at 10:21:36:
The 6C8G is in my view 'the 6SM7 that never was'.
Octal with a top cap, mu just under 40, runs nicely at about 4mA and dissipation a bit under 1 watt. Pretty much midway between 6SL7 and 6SN7.
I use this in a mu stage as driver for my best SET amp. The mu stage runs about 10mA total current, from a low impedance, and will swing over 100V both ways, so it'll drive a typical power triode very well indeed.
And it sounds very good! Look at those curves ....
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- There is a 6SM7 (well nearly) - Mike C 16:36:01 01/23/17 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
