|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: DIY amplifier for current hungry speakers question. posted by Iczerman on January 5, 2017 at 08:21:17:
The very first thing you must attend to is to be sure you have good transfer efficiency, between the amp, the speaker crossover, and the wiring from the crossover to the individual drivers.
There are huge "dividends' by having speaker wiring, all the way to the driver, optimized for transfer efficiency. That is THE starting point, in optimizing high or low efficiency speaker implementations.
It need not be e the most expensive wiring, to have optimized transfer efficiency, but it must be executed well, and with good thinking behind the choices.
Think of it as asking us about a supercharged large block Hemi engine, but the car you use has bald tires, and thin tires, on the drive wheels. Fix 'de tires first.
If you need cost effective solutions, ask us, or even me. First things first. Good luck.
Jeff Medwin
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- First things first - drlowmu 12:42:24 01/05/17 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
