In Reply to: RE: an interesting journey posted by megasat16 on December 9, 2016 at 11:14:09:
If you're right about this (mains impurity), that might be the most likely cause for the edge or glare.
I never had relevant issues with mains purity, although I don't think we have got particularly clean mains here in Belgrade. Thus I'm not inclined to accept that as a cause without further testing.
The buzz-noise-hum could easily be picked somewhere. If the other channel doesn't have it, try switching sides for the 2 heater supply types. If the buzz follows the culprit will be revealed.
If it's mains noise, would it be difficult to filter out some of it? Maybe a filter (cap and choke commercial type mains filter for appliances) would do the trick?
******
http://rh-amps.blogspot.com/
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: an interesting journey - Alex Kitic 13:21:24 12/09/16 (3)
- RE: an interesting journey - megasat16 14:35:44 12/09/16 (2)
- RE: an interesting journey - Alex Kitic 01:36:19 12/10/16 (1)
- RE: an interesting journey - megasat16 20:03:44 12/10/16 (0)