In Reply to: RE: Back to basics posted by Jeff Davison on May 31, 2012 at 22:53:19:
You need a coupling cap from plate to OP tranny in this config (parafeed). For the best outcome all the values should be carefully chosen and I'd even go as far as taking into account the coupling cap value from the previous stage if you are using a grid choke, but that's me.
As you know I love Schottkies but you largely lose their value when you string so many together. A good resistor will suffice and because you are using a CCS there is no need to bypass.
Naz
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Back to basics - Naz 23:56:29 05/31/12 (18)
- RE: Back to basics - Jeff Davison 00:44:48 06/01/12 (10)
- Try these values ... - Naz 17:25:45 06/01/12 (0)
- RE: Back to basics - Triode_Kingdom 10:21:53 06/01/12 (8)
- RE: Back to basics - danlaudionut 11:11:14 06/01/12 (7)
- RE: Back to basics - Triode_Kingdom 20:46:31 06/01/12 (6)
- RE: Back to basics - danlaudionut 00:17:22 06/02/12 (5)
- RE: Back to basics - Triode_Kingdom 16:28:48 06/02/12 (4)
- RE: Back to basics - danlaudionut 00:40:05 06/03/12 (3)
- RE: Back to basics - dave slagle 08:05:06 06/03/12 (2)
- RE: Back to basics - danlaudionut 13:52:49 06/03/12 (1)
- RE: Back to basics - dave slagle 15:52:23 06/03/12 (0)
- RE: Back to basics - danlaudionut 00:08:46 06/01/12 (6)
- RE: Back to basics - Naz 17:30:48 06/01/12 (2)
- RE: Back to basics - danlaudionut 00:23:58 06/02/12 (1)
- RE: Back to basics - Naz 05:45:27 06/02/12 (0)
- RE: Back to basics - Jeff Davison 00:51:02 06/01/12 (2)
- RE: Back to basics - danlaudionut 01:27:24 06/01/12 (1)
- RE: Back to basics - Jeff Davison 00:25:51 06/05/12 (0)