In Reply to: The load teh MC should see should be at least 10 times it's own coil impedance. posted by Timbo in Oz on May 18, 2012 at 23:32:06:
Continuing this discussion, the normal 47k input resistor on a MM RIAA stage is the recommended load for the MM cartridge. This resistor could be increased to 250 k or more to reflect a reasonable load on the MC with a higher turns ratio than in this example.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: The load teh MC should see should be at least 10 times it's own coil impedance. - TimFox 06:57:06 05/19/12 (3)
- RE: The load teh MC should see should be at least 10 times it's own coil impedance. - Eli Duttman 14:05:40 05/19/12 (2)
- RE: The load teh MC should see should be at least 10 times it's own coil impedance. - TimFox 13:21:46 05/20/12 (0)
- RE: The load teh MC should see should be at least 10 times it's own coil impedance. - Naz 06:43:32 05/20/12 (0)