In Reply to: RE: BDT Preamp Schematics posted by kenev on June 12, 2008 at 07:31:23:
Hi Evangelos,
The test work was done on a modified self bias CCS board. I have a board layout in the works that is mostly done. Only need to order a set of boards so I can stuff one of them and make sure it all works as planned. When all checks out good I'll put the ExpressPCB board file and a BOM in the down load section of my web page.
I've added more to the Swenson regulator page this evening with more info on setting up the regulator, the new board layout, and a picture of the test mule for entertainment.
Using the circuit designators on my schematic, C1 and C2 are film caps, C5 is a 35V electolytic. C1 and C2 need to be high performance caps, C5 is non critical.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: BDT Preamp Schematics - Gary P 18:19:36 06/13/08 (0)
- RE: BDT Preamp Schematics - jkeny 23:12:40 06/14/08 (0)
- Thank You - nc 19:49:14 06/13/08 (0)