Home Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

Re: Yet better solution is

SS
I thought of the high frequency roll off and Im only doing it on the line stage and interstage caps but when I did the frequency sweep on the RTA and checked the distortion again at 1khz and 10khz and 15khz and the distortion dropped at 2.5v by about .001 and when I took the ground wire off it went back up by that tiny bit..Frequency response was no change at all..I have actually have some gudeman pios and they have a clamp on them for shield grounding and I was talking to terry dewick he also said you can ground those type caps with no problem because even in highly stable oscillator circuits and RF circuits they ground them so that was the intent of the manfufacturer or military.


This post is made possible by the generous support of people like you and our sponsors:
  Western Glow Tube Service  


Follow Ups Full Thread
Follow Ups
  • Re: Yet better solution is - Michael Samra 20:31:29 04/30/07 (0)


You can not post to an archived thread.