Home Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

[ Follow Ups ] Thread: [ Display  All  Email ] [ Tube DIY Asylum ]
[ Alert Moderator ]

Limiting the bass

I would suggest doing two things.

1. Put a 200uf bypass on your cathode resistor for the KT66. Putting a 2.7uf won't give you a knee like in a crossover, it will slope way up in the frequency range. You basically put in the Vox "Twang" switch on full twang.

2. If you want to limit the bass, use an input cap and input resistor to provide a first order highpass filter. A 0.02uf cap and a 100K resistor will give you an 80hz cuttoff
_______________________________
Long Live Dr.Gizmo


This post is made possible by the generous support of people like you and our sponsors:
  Signature Sound   [ Signature Sound Lounge ]

Follow Ups Full Thread
Follow Ups
You can not post to an archived thread.

[ Top Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2024, Audio Asylum, all rights reserved ]
[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]