In Reply to: Re: Mod tube OP-stage, Sugestions appreciated posted by ahlgren11@telia.com on April 8, 2007 at 10:49:38:
PixIn my circuit the NiCad sounded more articulate
while the MiMh sounded more musical.
I went with the NiMh. YMMV
On the choke I would recommend 100H+
I like over-kill in this position.
Now DCR will determine the current
with 1300DCR being about 10mA.
Lower DCR will give you more current
and higher DCR will give you less current.
1000DCR will give you about 8mA.
Since you're in Sweden try the Lundahl
LL1667 but only use one winding or
the LL1668 and add a 620R in series.
The LL1668 would be less prone to hum pickup
because you are using both windings.DanL
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Mod tube OP-stage, Sugestions appreciated - danlaudionut 11:01:36 04/08/07 (3)
- Re: Mod tube OP-stage, Sugestions appreciated - ahlgren11@telia.com 01:39:13 04/09/07 (2)
- Re: Mod tube OP-stage, Sugestions appreciated - danlaudionut 03:52:27 04/09/07 (1)
- Re: Mod tube OP-stage, Sugestions appreciated - ahlgren11@telia.com 04:33:37 04/09/07 (0)