|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: I'd suggest posted by Russ57 on April 2, 2007 at 09:47:46:
...as long as you organise a higher B+ of up to 500V. Follow Russ's point of a choke input filter if at all possible, as it makes a BIG difference to the sound.If you go for two pairs of output tubes, then I'd suggest using 6H30's as the driver tubes with 12k anode loads and lots of current - in fact this is the exact tube line up you can expect to see very soonas a kit from Brian Cherry's DIYHiFi Company (Hong Kong), and also from (my) Vacuum State in Europe.
Triode connected - two pairs of 6550 will easily deliver 50 watts of extremely good pure Class A1 sound with this circuit.
Regards, Allen
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- This basic circuit works very well with KT88.6550 type tubes... - Allen Wright 10:09:30 04/02/07 (11)
- Got a version that will work with EL-84's? - Ivan303 13:10:13 04/03/07 (10)
- EL84 Amp - another possibility - Gingertube 18:14:21 04/04/07 (2)
- Re: EL84 Amp - another possibility - pipo 02:46:29 04/05/07 (1)
- Re: EL84 Amp - another possibility is the STC el84 or ecl82 - pipo 02:49:18 04/05/07 (0)
- Only need to reduce the B+... - Allen Wright 01:25:01 04/04/07 (0)
- It will work with them but.... - Russ57 17:01:31 04/03/07 (5)
- I disagree... - Allen Wright 04:43:42 04/04/07 (4)
- I think I was misunderstood - Russ57 06:14:49 04/04/07 (3)
- He did say he wanted real killer of a El84 amp... (nt) - Allen Wright 08:13:17 04/04/07 (2)
- cascode question for allen wright - pipo 02:44:21 04/05/07 (1)
- maybe saw it, never tried it. - Allen Wright 06:03:17 04/05/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
