|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Re: Parafeed PP with current source on joined cathodes posted by fatbottle on March 22, 2007 at 12:20:25:
"Problem is the transformer will still need to accept some DC if it's connected between the anodes without a cap"If you mean DC current, yes. The difference is that current (the un-balance current) is now flowing across the whole primary winding not just one half. So I would say that balance is twice as critical in a parafeed circuit without caps as in a conventional push pull circuit for a given output transformer.
Tre'
Have Fun and Enjoy the Music
"Still Working the Problem"
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Parafeed PP with current source on joined cathodes - Tre' 07:47:35 03/23/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]