|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Morrison Micro 3.5 Is it polarized or not , poly or not ? posted by Les Hudson on March 16, 2007 at 07:10:34:
I don't have the magazine in front of me, but if memory serves, it's 2.5k (2500 ohms). It's certainly NOT 25k. This resistor has fairly high current and voltage going through it, and therefore tends to run HOT. I actually put a small burn mark on the furniture because of this resistor. Thankfully, it was just a 'thrift store' type of cabinet. I'd use no less than a 25 watt (50W is better) resistor here, and make sure it has lots of room to breath.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Morrison Micro 3.5 Is it polarized or not , poly or not ? - gilmorneau 10:28:42 03/16/07 (1)
- Thanks! NT - Les Hudson 12:08:31 03/16/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
